To Next PageTo Next Page
Need help?Do you have a question about the Vortex core and is the answer not in the manual?
General| Layout | 40% |
|---|---|
| Switch Type | Cherry MX |
| Key Rollover | N-Key Rollover |
| Weight | 500g |
| Number of Keys | 47 |
| Switch Mount Type | Plate-mounted |
| Case Material | Aluminum |
| Keycap Material | PBT |
| Connectivity | Wired |
| Backlight | No |
| Programmability | Yes |
| Operating System Compatibility | Windows, macOS, Linux |
| Connection | USB |
Enter programming mode by pressing Fn + R_Ctrl. R_Spacebar LED will steadily light blue.
Select a key to program, indicated by R_Spacebar LED flashing red. Then input desired content.
Press Fn + R_Ctrl to exit programming mode. The Spacebar right LED will turn off.
R_Ctrl, M, <, >, and L_Shift keys are fixed and cannot be programmed.
Supports Fn layer programming, time delays (15ms, 0.1s, 0.5s), and up to 32 key strokes per key.
Hold Fn + R for 5 seconds to restore the layer to default settings. L_spacebar LED flashes white.
Hold both Alt keys for 5 seconds to clear all programmed key codes and return to default layer.
Switch layers by pressing Fn + M, <, >, or Shift, indicated by Spacebar LED color.
Default is LED off. Layer 2 (Red), Layer 3 (Green), Layer 4 (Blue) are indicated by Spacebar LED.
L_Win + L_Alt + R_Spacebar remaps R_Shift, R_Alt, Menu, R_Ctrl to arrow keys.
Swap Fn/Pn keys by holding Fn/Pn + L_Shift for 3 seconds, then selecting a new key.
Fn or Pn keys can only be swapped with L_Ctrl, L_Win, L_Alt, Pn, and L_Spacebar.
