EasyManuals Logo
Home>Vortex>Telescope>Diamondback

Vortex Diamondback User Manual

Vortex Diamondback
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
5 4
Properly focus the binocular
For the best reults, follow this two-step process to properly
adjust the center focus and diopter. Choose an object about
20 yards away and stay in the same spot until you have
adjusted the binocular for your eyes.
1. Adjust the center focus—start by
closing your right eye or covering
the right objective lens with your
hand. Focus your left eye on the
object and adjust the center focus
wheel until the image is in focus.
Leave the center focus in this
position as you adjust the diopter.
2. Adjust the diopter—start by closing your left eye or
covering the left objective lens with your hand. Look
through your right eye and adjust the diopter ring (found
on the right eyepiece) until the
object is in focus. Make note of this
diopter setting in case you need
to set it again. From this point on,
you will only need to use the center
focus wheel.
The Diamondback comes with a rainguard for the ocular
lenses and tethered objective lens covers. Use these covers
to protect the lenses whenever you are not using your
binocular.
Lens Covers
The Diamondback’s protective case provides safe storage
between viewing sessions.
Carry Case
accessOries
Attach the padded neck strap to the Diamondback in these
three simple steps.
Neck Strap
1. Push a few
inches of the strap
through the strap
attachment on the
binocular.
3. Adjust the
overall length, then
pull the strap tight
until it’s secured
within the buckle.
2. Hold the buckle
and thread the end of
the strap through the
buckle.
Note: If using another type of strap, never attach metal o-rings directly
onto the strap attachment.

Other manuals for Vortex Diamondback

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vortex Diamondback and is the answer not in the manual?

Vortex Diamondback Specifications

General IconGeneral
Exit pupil3.6 mm
Eye relief18 mm
Prism type-
WaterproofYes
Lens coatingFully Multi Coated (FMC)
Magnification8 x
Product colorBlack, Green
Objective diameter28 mm
Field of view (at 1000 m)101.19 m
Interpupillary distance (max)74 mm
Interpupillary distance (min)55 mm
Weight and Dimensions IconWeight and Dimensions
Depth- mm
Width116.84 mm
Height111.76 mm
Weight396.89 g

Related product manuals