Vortex M SSK - Page 2

Step 1
Use the hex key to unscrew the case (M2 black screw * 8). 使用六角扳手來拆卸外殼
（M2 黑色螺絲 * 8）
Step 2
After disassembling the top and bottom case, secure the daughterboard at the
marked locations in the picture below, and attach the gaskets according to
preference. 拆卸上蓋和下蓋後，將子板固定在下圖中標記的位置，並可根據個人喜好貼上墊
片。