Vortex M SSK - Page 7

Step 7
Flip the top case of the kit to the back and position the Poron plate foam, followed
by the Poron switch pad along the F-row. Finally, place the PCB on top. Then
screin the M2 black screw*4 pcs.將套件的上蓋翻轉至背面，接著在 F-row 那一排放置
Poron 夾層泡綿和 Poron 軸下墊，最後再放上 PCB。接著再鎖上 4 顆 M2 黑色螺絲將其固定