Radian
™
CARBON
6 7
VIP WARRANTY
OUR UNCONDITIONAL PROMISE TO YOU.
We promise to repair or replace the product. Absolutely free.
Unlimited
Unconditional
Lifetime Warranty
service@VortexOptics.com • 800-426-0048
Note: The VIP Warranty does not cover loss,
theft, deliberate damage, or cosmetic damage
not affecting product performance.
For additional information, and the most up-to-date
product manuals, visit VortexOptics.com
Attaching/Removing a Head
To mount a head to the tripod:
1. Lift the Quick-Release Locking Latch on the tripod.
2. Press and hold the Quick-Release Button and fully
seat head into the tripod. Once seated, the head
can be oriented in any direction.
3. Rotate the Quick-Release Locking Latch down to
the locked position.
4. To remove the head, follow these steps in
reverse order.
NOTE: If needed, the locking latch can be repositioned
by shifting the latch to the left and rotating the latch
up/down to reposition.
Press the Quick-Release Button on the tripod
to seat the leveling head.
Quick-Release
Locking Latch
To Next Page
Loading...
Need help?
General
