Chainsaw VO2811
11
Here’s how to saw correctly!
DANGER!
Risk of injury!
Always switch the motor off before
you put the device down!
•
Search the work area and remove objects
which are in your way.
•
When you begin work, check the safety of
the device (► Check before starting! –
p. 13).
•
Take the device in both hands as
instructed.
Risk of rebound!
Rebounds occur if the upper edge or tip of
the saw rail touch wood or other hard
objects. The device is thrown with high
energy back and forth, which can cause
extremely severe injuries.
DANGER!
Risk of injury!
When working with the device, dan-
gerous rebounds may occur! Severe
or even fatal injuries can be the
result! Before beginning work with
the device, the chain brake must be
checked to ensure that it is function-
ing correctly.
Avoid letting the area of the saw rail depicted
on the right touch wood or other hard
objects.
In order to reduce the risk of injury in case of
a rebound, the device is equipped with a
chain brake which is triggered automatically
on impact and which stops the saw chain
immediately.
For safety reasons, the functionality of the
chain brake must be checked each time the
device is used (► Checking the chain brake
– p. 12).
With less strong rebounds, it can happen that
the chain brake is not triggered automati-
cally. For this reason it is important that the
device be held fast with both hands.
To Next Page
Loading...
General