To Next PageTo Next Page
Need help?Do you have a question about the Vortice VORT-KRYO POLAR 10 and is the answer not in the manual?
General| Energy Efficiency Ratio (EER) | 2.6 |
|---|---|
| Refrigerant | R290 |
| Noise Level (Indoor) | 64 dB(A) |
| Wi-Fi Enabled | No |
| Smart Control | No |
| Type | Portable |
| Cooling Capacity | 10000 BTU/h |
| Heating Capacity | Not Applicable |
| Seasonal Energy Efficiency Ratio (SEER) | Not Applicable |
| Heating Seasonal Performance Factor (HSPF) | Not Applicable |
| Operating Temperature (Heating) | Not Applicable |
| Noise Level (Outdoor) | Not Applicable |
| Power Consumption (Heating) | Not Applicable |
| Dimensions (Outdoor Unit) | Not Applicable |
| Weight (Outdoor Unit) | Not Applicable |
Key safety instructions and warnings to prevent injury and ensure safe operation of the appliance.
Identifies the key parts and accessories of the VORT-KRYO POLAR unit, including hoses and panels.
Step-by-step guide for installing the hot air extraction hose and window panel.
Instructions for fitting the active carbon filter into the appliance.
Details the buttons and indicators on the appliance's control panel.
Explains how to set operating mode, temperature, and fan speed for optimal performance.
Guides on using timer, sleep mode, and understanding auto-diagnosis error codes.
Instructions for operating the 'Super Cool' mode, including tank preparation.
Procedure for emptying the internal condensation tank when it is full.
How to set up continuous drainage to avoid emptying the condensation tank manually.
Procedure for cleaning the exterior of the appliance using a damp cloth and mild detergent.
Steps to clean the appliance filters using a vacuum or water.
Recommended steps for servicing the appliance at the end of the season for long-term storage.
Common checks to perform if the appliance is not functioning correctly, including power and indicator status.
Diagnosing and resolving issues related to poor performance, such as environmental factors or blocked vents.
Identifying causes of unusual noise or vibration, such as placement or leveling.
Troubleshooting steps if the compressor is not operating, possibly due to thermal cut-out.
Information on the proper disposal of the appliance at the end of its life, adhering to environmental regulations.
