Need help?Do you have a question about the Vortice VORT KRYO-POLAR EVO and is the answer not in the manual?
General| Cooling power | 12000 BTU/h |
|---|---|
| Refrigerant | R32 |
| Cooling Capacity | 3.5 kW |
| Power Supply | 220-240V/50Hz |
| Weight (Indoor Unit) | 9 kg |
| Energy Efficiency Ratio (EER) | 3.2 |
| Power Consumption (Cooling) | 1.1 kW |
| Power Consumption (Heating) | 1050 W |
| Air Flow Rate | 500 m³/h |
| Operating Temperature (Cooling) | 16°C to 32°C |
Covers warnings and precautions regarding the use of refrigerant R290, including its flammability.
Lists relevant EU directives and standards the appliance complies with.
Details the installation process using panels for sliding or sash windows.
Instructions for venting hot air through a window or wall using the exhaust hose.
Step-by-step guide on how to install the active carbon filters.
Details the buttons and indicators on the appliance's control panel.
How to turn the unit on/off and its automatic operation based on room temperature.
Guides on selecting different operating modes like Auto, Cool, Fan, Dry, Heat, TiO2.
Instructions on adjusting temperature and fan speed.
Details on setting the operating timer for automatic shut-off or delayed start.
Specifics for operating the unit in cooling mode, including fan speed selection.
How to activate and use the sleep mode for gradual temperature adjustment.
Operating the unit solely in fan mode with adjustable speed.
Instructions for using the dehumidification mode and managing water collection.
Details on using the heating mode, including exhaust and drainage requirements.
Information on activating the TiO2 function for air quality improvement.
Details on using the 'Efficiency boost' mode requiring water addition.
Detailed instructions on how to drain water collected during Cooling or Dehumidify modes.
Instructions on how to clean and maintain air filters, including carbon filter replacement.
Guidance on storing the unit and safe decommissioning procedures.
To Next Page
