Why is my Vortice VORT QUADRO MICRO 100 Fan not exhausting air effectively?
If your Vortice Fan isn't exhausting air effectively, it might be because the unit is too small for the room. Consider replacing it with a higher-rated Vortice unit or adding another Vortice unit. Alternatively, the air intake or exhaust may be partially obstructed; in this case, clear and/or clean the affected components.
What to do if my Vortice Fan is inoperative?
If your Vortice Fan is inoperative, the cause might be no power supply. Check the electrical system's main switch and ensure that all electrical connections have been correctly made.
Why does my Vortice Fan never stop running (Timer - T HCS)?
If your Vortice Fan with a timer (T HCS) never stops, it could be due to incorrect wiring or a high humidity level in the room. Check the electrical connections. If humidity is the issue, consider choosing a more powerful extractor fan.
Highlights precautions to prevent user injury during appliance use.
Lists precautions to avoid damage to the appliance.
General| Air Flow | 100 m³/h |
|---|---|
| Noise Level | 32.1 dB(A) |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Weight | 2.6 kg |
| Hole Diameter | 100 mm |
| Power | 28 W |
| IP Rating | IPX4 |
| Diameter | 100 mm |
To Next Page