To Next PageTo Next Page
Need help?Do you have a question about the Vortice LINEO 100 Q V0 ES and is the answer not in the manual?
General| Diameter | 100 mm |
|---|---|
| Power | 20 W |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Airflow | 280 m³/h |
| Noise Level | 41.5 dB(A) |
| Protection Class | IPX4 |
| Nominal Voltage | 230 V |
| Degree of Protection | IPX4 |
| Weight | 0.8 kg |
| Max. ambient temperature for continuous running | 50 °C |
| Sound Pressure Level at 3m | 32 dB(A) |
| Duct Diameter | 100 mm |
| Insulation Class | II |
| Type | Centrifugal fan |
General safety warnings and precautions to avoid injury and appliance damage.
Information on where and how the appliance is designed for use.
Guidelines for proper installation and electrical connection of the appliance.
Procedure to select the specific fan model using dip-switch settings.
How to choose between two-speed or adjustable speed modes.
Adjusting the minimum and maximum speed settings for the motor.
Steps to reset V1 and V2 values to default factory settings.
Details on how the appliance operates in two-speed and adjustable speed modes.
Instructions for maintaining and cleaning the appliance.
Information on the proper disposal of the appliance at the end of its life.
Important notes regarding wire connections for external potentiometer wiring.
Important notes regarding wire connections for external speed switch wiring.
Important notes for wiring the control box with potentiometer and ON/OFF functions.
Important notes for wiring the DIN type external potentiometer.
Important notes for wiring with an external 0-10V generator signal.
Important notes for wiring an external potentiometer to various models.
Important notes for wiring an external speed switch to various models.
Important notes for wiring the control box to various models.
Important notes for wiring the DIN type external potentiometer to various models.
Important notes for wiring an external 0-10V signal to various models.
Terms and conditions for warranty service in Italy.
Terms and conditions for warranty service in the UK and Ireland.
General warranty terms for other countries.
The first part of the warranty certificate to retain for servicing.
The second part of the warranty certificate to send within 8 days of purchase.
Section for user's personal information for warranty registration.
