Installation and Operating Manual
VPC Jupiter 100 with Measuring Shunt 100 A No. 5747
VPC Jupiter 200 with Measuring Shunt 200 A No. 5748
VPC Jupiter 400 with Measuring Shunt 400 A No. 5749
The VPC Jupiter (hereinafter referred to as Jupiter) is a user-friendly multi-panel system for campers
combining the most important functions and information in one unit.
The VPC Jupiter consists of a display and control panel, as well as of the smart shunt for current measurement
and evaluation of the residual battery capacity.
It is equipped with a dual USB charging jack with a maximum charging current of 2.5 A for appliances which
can be charged via USB, such as smartphones or tablets.
Battery Computer for the Board Battery
Voltage in V
Battery current in A
Battery capacity in % and Ah
Remaining time in h
Undervoltage protection
Voltage of the starter battery in V
Solar computer
Suitable for all VOTRONIC Solar Charging
Controllers (also VBCS Tripe) from year
of construction 2014
Instantaneous solar power in W
Instantaneous solar current in A
Charged solar capacity in Ah
Charged solar power in kWh
Level indicator
Level fresh water and sewage water tank
in %
Pump Switch
Switch for fresh water pump
max. 16 A (potential-free output)
Thermometer/clock
Inside temperature/outside temperature
in °C, including 2 temperature sensors
Time in 24 hours format
Main switch function
Main switch for board supply via
terminal 0.3 A
Please read the operating manual and the safety regulations completely prior to start-up of the
system.
To Next Page
Need help?
General
