Cancel station divert when busy
Press the Scroll down key (æ) until Station Divert is
displayed
Select ð Station Divert
Select ð Divert when busy
Diverting calls when your station does not answer
Press the Scroll down key (æ) until Station Divert is
displayed
Select ð Station Divert
Select ð On No Answer
Select the station or
Press Divert to Voice Mail (This diverts all calls to the
stations Voice Mail box)
Cancel Divert On No Answer
Press the Scroll down key (æ) until Station Divert is
displayed
Select ð Station Divert
Select ð On No Answer
Diverting Calls to external numbers
Line divert and station divert can be set up to an external
number. In all cases this requires two lines.
Proceed as above for Line and Station Diverting
When prompted for the destination number dial 0 (for a
PSTN) line or 8 (for a VoIP line) and the target external
number
Note: For IP lines you must subscribe to VoIP and DSL
services
Answering Machine
Note: The Answering Machine is a system wide answering
machine, the Voice Mail is for individual stations.
Using your Vox PBX Operator Console Using your Vox PBX Operator Console