22
FMM MODULATION(ON/OFF)
This setting allows you to turn the FMM modulator
ON or OFF.
FMM CHANNEL
This setting allows you to select the frequency.
The unit has a 100 channel built-in wireless FM
Modulator. The FM Modulator can be set from
88.1MHz to 107.9MHz , i.e.88.1,88.3,88.5,88.9,90.1
etc.
To choose an FM frequency for audio playback
through your vehicle’s radio:
1. Use the p q t or u cursor buttons to select a
frequency not used by a radio station in the area.
Press OK to select the highlighted frequency.
There are a total of 3 FM CHANNEL pages
containing frequencies from 88.1 MHz to 107.9
MHz in 0.2 MHz steps. To access the additional FM
Channel pages, use the t or u cursor buttons to
highlight the on screen left and right arrows and
press OK. Once the frequency has been selected,
tune the vehicle’s radio to the selected frequency.
2. Press the DVD button to restore the remote
control to DVD functions.
Note: The wireless FM modulator will perform well in
most applications. However, in certain geographical
areas the quality of the wireless signal may be less than
optimal, resulting in static or strong local station bleed
through. If this is a consistent problem, an FMDIRB
(hard wired FM connection) can be installed by your
dealer.
PICTURE
To Next Page
Loading...
Need help?
General