Vox BM-1329 - User Manual

Questions and Answers

E
Eric GraySep 10, 2025
What to do if the ingredients aren't stirred evenly in my Vox BM-1329 Bread Maker?
- S
  Sherry BishopSep 10, 2025
  Unevenly stirred ingredients and poor baking in your Vox Bread Maker can occur due to several reasons. It may be that the selected program menu is improper, so select the proper program menu. Also, opening the cover several times after operating can cause the bread to be dry with no brown crust color, so don’t open cover at the last rise. If the stir resistance is too large, the kneader may not rotate adequately; check the kneader hole, then take the bread pan out and operate without any ingredients. If it's still not normal, contact the authorized service facility.
S
Sara WalkerSep 12, 2025
What does “H:HH” mean on my Vox Bread Maker display?
- D
  Denise PerkinsSep 12, 2025
  If you see “H:HH” on the display of your Vox Bread Maker after pressing the “START/STOP” button, it means the temperature inside the bread maker is too high to make bread. To resolve this, press the “START/STOP” button again, unplug the bread maker, take out the bread pan, and open the cover until the bread maker cools down.
K
Kelly BriggsSep 14, 2025
What to do if it is difficult to take bread out of my Vox Bread Maker?
- S
  Steven SmithSep 14, 2025
  If it's difficult to remove the bread from your Vox Bread Maker, the kneader might be tightly stuck to the shaft in the bread pan. After taking the bread out, put hot water into the bread pan and let the kneader soak for 10 minutes, then take it out and clean.
A
Angela TurnerSep 16, 2025
Why is the bread surface of my Vox Bread Maker adhered to dry powder?
- P
  Paul GreenSep 16, 2025
  If the bread surface in your Vox Bread Maker is sticking to dry powder, it could be due to strong glutinosity ingredients like butter or bananas. Avoid adding these ingredients. It may also be due to inadequate stirring from a shortage of water. Check the water level and the mechanical components of the bread maker.