Need help?Do you have a question about the Vox DA15 and is the answer not in the manual?
General| Number of Amp Models | 11 |
|---|---|
| Technology | Modeling |
| Power Output | 15 Watts |
| Channels | 2 |
| Effects | Reverb, Delay |
| Controls | Gain, Volume |
| Inputs | 1 x Instrument, 1 x Aux In |
| Outputs | 1 x Headphone Out, 1 x Line Out |
| Dimensions | 16 x 8.94 x 14.96 inches |
| Speaker | 1x8" Custom Speaker |
Essential precautions for safe operation and installation of the apparatus.
Compliance information and measures to correct interference for US users.
Explanation of CE mark conformity for European markets.
Welcoming message, manual reading advice, and amp overview.
Highlights main features like styles/effects and explains the signal flow.
Step-by-step guide to connect and turn on the amplifier for initial use.
How to select and listen to the amplifier's factory preset sound styles.
How to switch between the two programmable channels (CH1 and CH2).
Step-by-step guide for creating and adjusting custom sounds using manual controls.
How to select, adjust effects, and use the bypass function for sound creation.
Details the input, amp, and effect sections of the amplifier's top panel.
How to use EDIT 1, TAP, and BYPASS buttons to adjust effect parameters.
How to use the TAP button for modulation speed or delay/reverb time.
Explains how to switch between Preset, Manual, and Channel Select modes.
How to switch between CH1/CH2 and the WRITE button function.
Explains the AC power and foot switch connectors on the rear panel.
Details the functionality of the LINE/PHONE output jack for headphones or external devices.
How to select and use the amplifier's factory preset sound styles.
How to select and recall saved user programs from CH1 and CH2.
Explains how Manual mode mimics a conventional guitar amp with knob settings.
How to cycle through CH1 and CH2 programs.
Step-by-step process to dial in desired sounds using controls and effects.
Specific instructions for setting delay time, level, and feedback.
How to adjust the noise reduction level using the TAP and EDIT 1 controls.
Procedure to save created sounds to CH1 or CH2 using the WRITE button.
How to use the Original Value function to view saved settings.
Instructions to reset the amplifier to its original factory default settings.
How to use the left switch to change between CH1 and CH2.
How to assign and use the right switch for effect bypass or Manual mode.
Descriptions of the 11 distinct sound styles available on the amplifier.
Explains how to use TAP, EDIT 1, and BYPASS for effect adjustments.
Details the parameters (SENS, ATTACK, POLARITY) for the Auto Wah effect.
Explanation of COMP effect parameters (SENS, ATTACK).
Details parameters for Phaser (SPEED, RESONANCE) and Chorus (SPEED, MIX).
Details parameters for Flanger (SPEED, RESONANCE).
Details parameters for Tremolo (SPEED, DEPTH) and Rotary (SPEED, SENS).
Details parameters for Delay (TIME, MIX, FEEDBACK).
Details parameters for Reverb (TIME, MIX, HI DAMP).
Troubleshooting steps for amp not powering up or having no sound output.
Solutions for LINE/PHONE jack problems and when effects are not heard.
Lists details like number of styles, effects, programs, power output, and dimensions.
Information on what items are included with the amplifier and available options.
A template for users to document their favorite program settings.
To Next Page
