Do you have a question about the Vox Night Train 50 and is the answer not in the manual?
Warning about reducing the risk of fire or electric shock.
Caution regarding electric shock and not opening the unit.
Information on proper disposal of the product in the EU.
Connect your guitar here.
Switches between BRIGHT and GIRTH channels.
Warms tubes without output.
Turns the amplifier on/off.
Shows power status.
Controls for the Bright channel: LED, Gain, Treble, Middle, Bass, Thick mode.
Controls for the Girth channel: LED, Gain, Treble, Middle, Bass, Volume.
Master Volume, Tone Cut, and Tight mode controls.
Connect the power cord here.
Connect 8 ohm or 2x16 ohm cabinets.
Connect a 16 ohm cabinet.
Connect to your effect's input.
Connect to your effect's output.
Button to bypass the FX Loop.
Connect the optional VFS2A footswitch.
Warning about reducing the risk of fire or electric shock.
Caution regarding electric shock and not opening the unit.
Information on proper disposal of the product in the EU.
Connect your guitar here.
Switches between BRIGHT and GIRTH channels.
Warms tubes without output.
Turns the amplifier on/off.
Shows power status.
Controls for the Bright channel: LED, Gain, Treble, Middle, Bass, Thick mode.
Controls for the Girth channel: LED, Gain, Treble, Middle, Bass, Volume.
Master Volume, Tone Cut, and Tight mode controls.
Connect the power cord here.
Connect 8 ohm or 2x16 ohm cabinets.
Connect a 16 ohm cabinet.
Connect to your effect's input.
Connect to your effect's output.
Button to bypass the FX Loop.
Connect the optional VFS2A footswitch.
| Type | Tube Amplifier |
|---|---|
| Channels | 2 |
| Preamp Tubes | 3 x 12AX7 |
| Power Tubes | 2 x EL34 |
| EQ | 3-Band (Bass, Middle, Treble) |
| Effects Loop | Yes |
| Power Output | 50 Watts |
| Footswitch I/O | 1 x 1/4" |
| Footswitch | Optional |
| Controls | Gain, Bass, Middle, Treble |
Loading...