Voxoa Btunes - Getting Started; Powering On;Off; Pairing and Connecting

■ Getting started
1. Powering on/off the BTunes tx
2. Pairing /Connecting
1) How to enter pairing
Remarks:
◆ Pairing mode will last for 2 minutes, if not paired/connected with devices,
the BTunes tx will into standby mode.
2)Pairing the BTuns tx with Bluetooth receiver
Prior to using the BTunes tx for the first time, you have to pair it with a
Bluetooth receiver.The general pairing procedures are as follows:
1) Keep the BTunes tx and receiver within 1 meter ;
2) Make the BTunes tx and Bluetooth receiver enter pairing mode ;
3) BTunes tx will search and connect with Bluetooth receiver automatically.
After successful connecting, blue LED of the BTunes tx flashes twice every 4
seconds.
2
Function
Operation
LED indicator
Power on
Long press MFB button about 2 seconds
Blue LED on
Power off
Long press MFB button about 2 seconds
Red LED on
Function
Operation
LED indicator
Enter paring
mode
In the status of power off, long
press MFB button about 5 seconds
Red and Blue LED
flash alternately