S70
63
ENGLISH
PART NAMES AND FUNCTIONS
40. Memory bucket
This indicator serves two functions. The bucket outline details the cue memory status; a full bucket outline
indicates the cue memory is full. The six bars in the memory bucket detail the digital buffer. Each bar indicates 2
second.
41. Auto BPM indicator
Indicates the AUTO BPM counter is active.
42. Key Lock indicator
Indicates the KEY Lock function has been activated.
43. Pitch display
Indicates the set pitch value of a track in percent.
44. Playing address
This bar gives a visual approximation of a track's time. This bar will begin to fl ash when a track is ending.
45. Time display
These indicators will detail the current Minutes, Seconds, and Frames. The display will indicate either the
elapsed or remaining time of a track. The display time will depend on the selected time function. The selected
time function will be displayed above the TIME DISPLAY as remaining track time or elapsed track time.
46. Time Mode indicator
Indicates if the player shows the elapsed time of a track (the display reads “ELAPSED”) or the remaining time of
a track (the display reads “REMAIN
”
). Use the TIME DISPLAY MODE button
31
to switch between the modes.
47. Track display
This indicator describes which track is currently cued or is playing.
48. Track Format indicator
This indicator describes the fi le formate for the track.
49. Play Mode indicator
Indicates if the player is in Single mode (the display reads “SINGLE”) or in Continue mode (nothing on display). In
single play mode, the track will play once and return to Cue mode.
50. Reloop indicator
When “RELOOP” fl ashes, the loop is active.
51. Auto Cue indicator
This will indicate if the Auto Cue is on or off. Press and hold the SGL/CTN button
32
for 1 sec. to turn the Auto
Cue function on and off.
To Next Page
Loading...