Voxoa S70 - Page 20

S70
S70
65
ENGLISH
PART NAMES AND FUNCTIONS
52. Source Input Selector switch
These switches are used to select the input source assigned to each channel. Each channel may only be
assigned one input source at a time.
CH1 selected to PC + CH2 selected to PC – the entire unite works as a MIDI controller or you can set the mixer
section as Real Mixer in Utility Menu.
CH1 selected to PC + CH2 selected to DECK B - the Deck A works as a MIDI controller, the mixer works
internally with Deck B.
CH1 selected to PC + CH2 selected to LN2/PH2 - the Deck A works as a MIDI controller, the mixer works
internally with LN2/PH2 input.
53. USB 1 port
The port use to connect a USB memory device.
CAUTION
: Please turn on the power before you plug USB storage devices.
54. Input Gain
These knobs are used to adjust the audio source signal input gain for a channel. Never use the gain control to
adjust a channel's output volume. Setting the gain level properly will ensure a clean output signal.
55. Channel Equalizer High-Rang Adjust Knob And Kill switch
These knobs are used to adjust the treble (high-range) frequency sound for each channel. The adjustable range
is from -35dB to +10dB, Press this knob to active Kill function.
56. Channel Equalizer Mid-Rang Adjust Knob And Kill switch
These knobs are used to adjust the mid-range frequency sound for each channel. The adjustable range is from
-35dB to +10dB, Press this knob to active KILL function.
57. Channel Equalizer Low-Rang Adjust Knob And Kill switch
These knobs are used to adjust the bass (low-range) frequency sound for each channel. The adjustable range is
from -35dB to +10dB, Press this knob to active KILL function.
58. Channel fader
This FADER is used to adjust sound volume for each channel.
59. Fader Strat switch
This function works in conjunction with a compatible player. When used with a compatible player, You can use
the crossfader to start and stop a player with the mixer’s crossfader. The switch switches the FADER START
feature on and off. If this function is activated, the FADER START automatically returns the player to the preset
cue point.