Voxoa S70 - Page 26

S70
S70
71
ENGLISH
UTILITY MENU
6. EQ Kill
To turn on or turn off the 3 Bend EQ push buttons for Kill function
On: Turn on the EQ Kill function.
Off: To avoid pressing the kill buttons by mistake you can turn off the EQ Kill function.
7. Cross Fader
Setup the crossfader’s function.
Lock: To lock the crossfader in the middle of two channel.
Unlock: The crossfader is back to normal status.
8. Cross fader Reverse
On: Reverse the crossfader
Off: normal mode.
9. Display time
To setup the text display time in the screen. From 0.5 sec. to 12.0 sec. every 0.5 sec. interval.
A. Scroll Speed
To setup the scrool speed of text display. From 50 msec to 2000 msec every 50 msec interval
B. Sensitivity
JOG WHEEL Sensitivity Adjustment (Adjustment range is -20~+20).
The touch sensitivity of the JOG WHEELcan be adjusted to fit the needs and feel of different users. When
adjusting the sensitivity, be conscious of extreme settings which may affect your performance. Setting the
sensitivity too high would engage the touch sensitivity with the hand just above the wheel. Setting the sensitivity
too low may not engage the touch even while pressing fi rmly on the wheel.
C. Intensity
Adjust the display brightness. You can adjust the brightness range from 1 to 4.
D. A.CUE Level
Adjust the Auto Cue level. You can adjust the level range from -36dB to -78dB.
E. Bit rate
To setup the Bit rate display or not.
F. Version
To display the fi rmware version.
G. Load D
efaults
Press AUTO BEAT LOOP Control knob
1
to enter load defaults.
H. Exit & Save
Exit & Save setting to next power on. (Press the AUTO BEAT LOOP Control knob to Exit & Save in any operating
mode.)