Trunk Release:
When connected, pressing AUX for 1.5-seconds will remotely
release the vehicle trunk lid or rear hatch. This output remains
active until the button is released.
AUX 2:
When connected, pressing LOCK and UNLOCK together will
immediately activate this output to control an additional
convenience option. This output remains active until the buttons
are released.
Diagnostics
This security system is constantly monitoring all the switches and
sensors that are connected to it. It detects any faulty switches and
sensors and prevents them from disabling the entire system. The
system will also record and report any triggers that occurred
during your absence.
Refer to the ‘System Status Honks’ and ‘Table of Zones’ charts for
diagnostic information.
Arming Diagnostics
If the system is armed while an input is active, the unit sounds
once when arming and then one more time a few seconds later.
This is called Bypass Notification.
Bypass Notification does not occur when using Silent Mode or if
chirps/honks have been programmed OFF.
To Next Page
Loading...