© 2017 Van Putten Instruments BV | MAN-VP-SINL-UK | Revision:1701 | Date:22-03-2017
7
3 Product overview
The VPFlowScope in-line measures mass flow, temperature and pressure simultaneously. All these
parameters are key to proper compressed gas measurement and are therefore included in all
models. All data can be accessed by Modbus RTU, 4..20mA and pulse.
The VPFlowScope in-line is available in three configurations to fit every application. Use the
connector cap for sensor features only, ideal for integration into a central management system. Use
the display module for central read out and data logging. Use the VPFlowTerminal for central read out
and data logging on location where a standard display can not be read out. For all models, all
parameters and outputs are available.
The VPFlowScope in-line is available in three sizes: 0.5", 1" and 2". Additional options are available
for all types:
* An 8 Pin M12 connector can only be ordered in combination with a D0 model.
Order the VPFlowScope in-line KIT to receive the complete start kit with all required accessories,
everything you need to get started right away.
3.1 Configuration
The instruments are pre programmed and ready to use. For configuration of the outputs and data
logger, the VPStudio configuration software is used. This software can be downloaded from our
website. www.vpinstruments.com/downloads
To Next Page
Loading...