Portable Air Conditioner | 9
Operating Instructions
1. Parts:
A) Panel (The second panel may not be supplied)
B) Panel with one hole
C) Panel without hole (may not be supplied)
D) Screw to lock window kit in place
2. Assembly:
Slide Panel B and C into Panel A to widow width. When adjusting the window width, make sure that the Window
kit assembly is free from gaps and/or air pockets when taking measurements.
3. Lock the holes with screws. Make sure that there are no gaps or air pockets in the Window kit assembly after
installation.
WINDOW SLIDER KIT INSTALLATION
To Next Page
Loading...
