VRG Controls VPC BV Series User Manual

VRG CONTROLS LLC. 5 of 60 JUNE 2021
VPC “BV” SERIES VALVE PILOT CONTROLLERS
INSTRUCTION MANUAL
VRG Controls LLC. 5 of 54 APRIL 21, 2019
VPC “BV” SERIES VALVE PILOT CONTROLLERS
INSTRUCTION MANUAL
TABLE 1.0 VPC VALVE PILOT CONTROLLER TECHNICAL SPECIFICATIONS
NOTES
1. NC Balanced Valves and NO Seat & Nozzle internal
components may be exchange/converted to meet
applicaon requirements
2. ZERO Steady State emissions achieved when VPC
properly adjusted to exhibit factory advised deadband
seng
3. Consumpon is approximate and based upon 100 psig
Supply Gas number 3 orice, 98% output. Atmosphere
emissions may be completely eliminated when
Discharge to Pressure System incorporated.
4. Double acng VPC’s require addion of No-Vent
Device to achieve ZERO emissions at full open and full
closed
5. Double Acng Piston Actuators Equipped with Single
Acng VPC requires addional interface instrumentaon
such as pneumac posioner or pilot-operated trigger
valve (GAP).
Buna-N, Viton Oponal
3-1500 PSIG (22-10,342 kPa)
PATENT NO.:
US 9,400,060 B2
316
Buna-N, Viton Oponal

VRG Controls VPC BV Series Specifications

General

Brand	VRG Controls
Model	VPC BV Series
Category	Controller
Language	English