Wheel settings
VRS
®
DirectForce
®
Pro Formula Wheel
Shifter attack point and shifter
hysteresis
These two settings together determine the amount of travel that the shifters
require to engage and disengage. The engagement threshold, expressed in
percentage terms, is equal to the attack point plus ½ of the hysteresis value. The
disengagement threshold, expressed in percentage terms, is equal to the attack
point minus ½ of the hysteresis value. The shifters activate when pulling them
beyond the engagement threshold, and disengage when releasing them back
beyond the disengagement threshold.
Rotary switch mode
12 way rotary pulsed - This mode results in 12 independently pulsed (short
duration) inputs per rotary, depending on the physical position set
12 way rotary - This mode results in 12 independent and continuous (held forever)
inputs per rotary, depending on the physical position set
Encoder - This mode results in either of two pulsed inputs, where one occurs for
each clockwise click, and another for each counterclockwise click. Physical position
doesn't matter.
Page
32
To Next Page
Loading...