trimmer will illuminate to indicate that the adaptor is correctly
inserted into the trimmer and connected to the mains power
supply.
4. A 16 hour full charge will provide 30 minutes usage time.
INSERTING THE ADAPTOR CORD INTO THE STAND
1. Remove the trimmer, attachments and accessories from the
stand.
2. Hold the recharging/storage stand upside down.
3. Insert the adaptor plug into the hole on the base of the stand
and push firmly into position.
4. Route the cord through the channel on the base of the stand.
5. Place your thumb on the hinged back cover and push the cover
over the adaptor plug to secure the cord and plug in place.
CHANGING THE ATTACHMENTS
1. Before changing any of the attachments, ensure that the
appliance is switched off.
2. To remove an attachment head, hold the handle of the appliance
with one hand, push in the attachment release button, hold the
attachment head with the other hand and pull the head back
and away from the handle.
3. To attach an attachment head, place the attachment head over
the top of the handle, ensuring that the plastic lug is positioned
at the back. Slide the attachment head down until it clicks into
place.
To Next Page
Loading...
