10 Vsett display operation and porgramming
3、Card binding instructions
1.The instrument is not bound to ID card:
2.How to bind ID card:
After starting up, the LCD displays the normal contents. At this time, the meter can directly enter the working state.
The diagram below:
CARDS are bound by factory default
Late setting: When using mobile phone or NFC functional card binding, refer to the following methods
On the p09 interface, bring the NFC device or card close to the sensing area, and the number +1 at the bottom means the binding is successful.
Click 15 times in a row display 0. At this time, all ID CARDS that have been unbound are displayed.
Vsett display operation and porgramming
To Next Page
Loading...