9Vsett display operation and porgramming
2、Introduction of buttons and interfaces
2. When it is power on, long-press hold button continuously for 2s to turn off,press to change gear.
3. Long-press to enter P-code menu - refer to functions on page 18.
Enter the menu setting interface, press to increase or decrease the value, after the modification is finished;Press to switch to the next
parameterand save the value of the previous parameter;After parameter modification, long press again to exit the setting interface,
or wait for 8 seconds for automatic exit and save parameters
Vsett display operation and porgramming
To Next Page
Loading...