13Vsett display operation and porgramming
While power is on, press [4] button to turn on or off headlight.
Power On/Off
Speed Control
Headlight
Long-press the power button [3] for 2 seconds to turn on/off the scooter. then use NFC card to active it The scooter
turns off automatically if not used for 90 seconds
While stationary, and with the power on, Long-press the [3] button to cycle through the three different speed levels 1
to 3.Use the throttle to control the speed within each speed level.
Vsett display operation and porgramming
To Next Page
Loading...