VSSI V-Top - Care and Cleaning; Specifications

8
Care & Cleaning
The VSSI Hydraulic Surgery Table
may be cleaned with any commercially
available product recommended for use
on stainless steel. Frequent cleaning will
prolong the life and help maintain the
natural luster of the stainless steel.
To prevent scratching, use a soft cloth to
clean the top. If scrubbing is necessary,
use a nylon or plastic type scrubber.
When cleaning, always rub in the
direction of the “grain” of the metal.
To remove minor scratches, we
recommend using a 3M ScotchBrite
®
scouring pad rubbed lightly in the
direction of the “grain” of the metal.
Never use steel wool or steel
brushes when
cleaning your
surgery table. Steel particles may
become embedded into the stainless
steel and cause rust.
Avoid use of chlorine bleach
for cleaning.
Chlorides, bromides,
iodides and thiocyanates will cause
pitting, corrosion and discoloration of
any stainless steel. If using bleach, clean
thoroughly with water to completely
remove bleach residue.
Avoid excessive moisture.
The VSSI Hydraulic Surgery Table
contains electronic components that
may be damaged by excessive exposure
to moisture. When cleaning or mopping
the floor, do not leave the table in
standing water. For thorough cleaning,
remove the drainage trough and
reservoir and wash separately. Refer to
“Features/Operation”, page 7, for removal
instructions.
Specifications
V-Top Surgery Table
with Hydraulic Column:
Height: Adjusts 33 1/2" to 39 1/2"
Width: 20 1/4"
Length: 50" or 60"
Flat-Top Surgery Table
with Hydraulic Column:
Height: Adjusts 32 1/2" to 38 1/2"
Width: 22 1/8"
Length: 50" or 60"
Electrical: Operates on standard 110 VAC if ordered with optional heated top
The hydraulic column will lift up to 300 lbs.