3
GETTING STARTED
1. PLAN YOUR AUDIO SYSTEM
2. INSTALLATION REQUIREMENTS
3. DOWNLOAD THE VSSL APP
Once you’re ready to set up your SX product, download the app from the
app store on your mobile device. Open the app, press the “Add Product”
button, and we’ll guide you through pairing the SX Sync to your SX
Soundbar.
Your SX Sync acts as the source for rear surround speakers within an SX Dolby Digital surround
sound system. This product is specifically designed to connect ONLY to the SX Soundbar in cases
where in-ceiling speakers (connected to an amplifier with RCA input connections) are preferred
over SX Speakers to create a 5.1 surround sound experience.
The SX Sync will need to be close enough to the SX Soundbar in order to stay connected success-
fully via radio frequency technology. It is suggested that the SX Sync and SX Soundbar remain
within 100 feet of each other if the signal is needing to transmit through walls. That distance is
extended by 3x if the products are within line of sight.
If the connected amplifier cannot be within 100 feet of the soundbar, it is suggested to run RCA
cable from the amplifier to a location that is within 100 feet of the soundbar and has a power plug
for powering the SX Sync.
WATCHING TV
The VSSL SX Series allows you to listen to your TV’s audio AND your favorite streaming music within
a single, sleek design. The VSSL app will guide you on setting up your SX Sync and surround
speakers for TV and the Dolby Digital surround sound experience. When your SX Soundbar is
playing, so are the in-ceiling speakers connected to the SX Sync.
PLAYING MUSIC
Listening to music with VSSL is easy. Just play music in your favorite music streaming app, choose
your preferred streaming method, and select the SX Zone you want to play to. The surround
speakers connected to the SX Sync will then play whatever the rest of your paired SX products are
playing.
SETUP IN THE VSSL APP
With your SX Sync plugged into power, you will need to indicate in the VSSL app that you are ready
to pair. Simply press the “Add Product” button on the Settings Homepage, follow the instructions for
holding the pair button, then choose which SX Soundbar you’d like to pair it to.
The SX Sync requires an SX Soundbar in order to participate in streaming audio and playing Dolby
Digital surround content. You can find all configuration settings for the SX Sync and connected
speakers within the settings of its paired group.
VSSL SX SYNC
To Next Page
Loading...