1.Q&A
Q：How to reset camera back to factory default setting?
A：Hold the reset button for about 10 seconds to reset camera.
Camera default password: 888888 (Strong recommend to
revise your camera password).
Q : Any WiFi connection tips?
A : camera can only support 2.4G frequency signal，and
802.11b/g/n WiFi network.
1)The connected WiFi password should be less than 16 digitals,
and can not contain @ ￥！ ect special digitals, suggest to
revise the password to only contain letters and number.
2)Please upgrade to the latest version APP.
Q : No vision at night time ？
A : ① Check the IR function is enabled or not;
② Check the IR LED is on or not;
③ Reset camera back to factory setting;
④ Try to upgrade the camera to the latest rmware.
Q：What to do if camera picture is blurred?
A：① Enter video interface, adjust the picture quality to the HD
mode;
② Clean the camera lens with a cotton swab.
To Next Page
Loading...
