12
Base unit adapter: Input: 100-240 VAC, 50/60Hz,
Output: 6V DC, 450mA
Charger adapter: Input: 100-240 VAC, 50/60Hz,
Output: 6V DC, 450mA
18. The power adapter is intended to be correctly
oriented in a vertical or oor mount position. The
prongs are not designed to hold the plug in place if it
is plugged into a ceiling, under-the-table or cabinet
outlet.
19. For pluggable equipment, the socket-outlet shall
be installed near the equipment and shall be easily
accessible.
20. Telephone receivers produce magnetic elds that
can attract small metallic objects such as pins or
staples. To avoid injury, do not place the handset
where such objects can be picked up.
SAVE THESE INSTRUCTIONS
Battery
• CAUTION: Use Only Supplied 2.4V 400mAH Ni-MH
Battery Pack.
• Do not dispose of the battery in a fire. Check with
local waste management codes for special disposal
instructions.
• Do not open or mutilate the battery. Released electrolyte
is corrosive and may cause burns or injury to the eyes or
skin. The electrolyte may be toxic if swallowed.
• Exercise care in handling battery in order not to
create a short circuit with conductive materials.
• Charge the battery provided with or identified for
use with this product only in accordance with the
instructions and limitations specified in this manual.
To Next Page
Loading...
