Do you have a question about the VTech LS 1350 and is the answer not in the manual?
Type | Cordless Telephone |
---|---|
Number of Lines | 1 |
DECT 6.0 Technology | Yes |
Frequency | 1.9 GHz |
Caller ID | Yes |
Call Waiting | Yes |
Handset Display | LCD |
Speakerphone | Yes |
Last Number Redial | Yes |
Ringer Volume Control | Yes |
Battery Type | NiMH |
Talk Time | Up to 10 hours |
Standby Time | Up to 5 days |
Intercom | Yes |
Power Requirements | AC Adapter |
Expandable | Up to 5 handsets |
Phonebook Capacity | 50 entries |
Specifies the frequency generation method used by the device.
Indicates the operational frequency range of the telephone.
Details the radio frequency power output level.
Number of available communication channels for the device.
Expected operational distance under typical conditions.
Details about battery types and adapter specifications.
Information on the power adapter for the telephone base unit.
Environmental factors that may affect device operation.
Details the energy usage in different operational modes.
Information on the one-year warranty coverage and terms.
Instructions for correctly installing the handset battery.
Steps to connect the telephone base to power and phone line.
How to check the battery status on the handset screen.
Troubleshooting steps if no dial tone is heard after installation.
Dialing a number before lifting the handset.
How to answer an incoming call on the cordless handset.
Steps to end an ongoing call.
How to silence the handset's incoming call alert.
How to lock or unlock the handset's keypad.
Using two handsets for a three-way conversation.
How to change the listening volume on a cordless handset.
How to view entries in the redial list.
Saving a number from the redial list to the phonebook.
Dialing a number directly from the redial list.
Removing a single entry from the redial list.
Clearing all entries from the redial list.
Initiating the paging process to locate a handset.
Stopping the handset paging process.
Steps to create a new contact in the phonebook.
How to browse and search contacts in the phonebook.
Viewing the status of phonebook storage.
How to view incoming call history.
Adding a caller ID entry to the phonebook.
Blocking specific numbers from the caller ID log.
Adding a number to the call block list.
Viewing the list of blocked numbers.
How to listen to recorded messages on the answering system.
Options for managing message playback (play, pause, skip).
How to change the display language on the handset.
Choosing a ringtone for incoming calls.
Adjusting the loudness of the handset's ringtone.
Enabling or disabling button press sound effects.
Controlling audible alerts for battery or range issues.
Setting up the alarm function on the handset.
Assigning a custom name to the handset for identification.
Selecting what information to show on the handset display.
Removing a registered handset from the base.
Changing the dialing method from Tone to Pulse or vice versa.
Adjusting the duration of the flash signal.
Setting or changing the base unit's PIN code.
Adjusting power saving settings for range and transmission.
Configuring the transmission range for power saving.
Activating or deactivating the Full ECO power saving mode.
Configuring the main settings of the answering system.
Choosing between ANS & REC or ANSWER ONLY modes.
Setting the language for answering system prompts.
General advice on handling the sophisticated electronic parts.
Proper handling to prevent damage from drops or impacts.
Precautions against moisture and water exposure.
Safety measures during electrical storms.
Instructions for cleaning the telephone's casing.
Guidelines for storing the telephone when not in use.