VTech 2-in-1 Map & Go Scooter - Product Features

10
PRODUCT FEATURES
1. On/Off/Volume Switch
To turn the unit On, turn the On/Off/
Volume Switch to the Low volume
or High volume position. You will
hear a sound, a phrase and a song.
To turn the unit Off, turn the On/Off/
Volume Switch to the Off position.
2. Automatic Shut-Off
To preserve battery life, the 2-in-1 Map & Go Scooter™ will
automatically shut down after approximately 45 seconds without
input. The unit can be turned On again by pressing any button,
twisting the Ring or turning the Map.
NOTE
If the unit powers down or if the light fades out during play, please
install a new set of batteries.
ACTIVITIES
1. Light-up Buttons
Press the Light-up Buttons to hear
playful music, fun phrases about
colors, trafc lights, counting and fun
sounds. The lights will ash with the
sound.
9. Please check the Wheel Locks before
using the scooter. The Wheel Locks
will spring into the locked position
when the Wheel Axels are properly
installed.