VTech 4-in-1 Learning Letters Train User Manual

9
9
9
5. Position the Hinge so that the large
hole is facing up. Insert the Hinge into
the hole on the front of the Pull Cart
until you hear it click into place. Once
you have attached the Hinge to the Pull
Cart, it cannot be removed.
6. Insert the Pull Cart Wheels with Axles
into the bottom of the Pull Cart until you
hear them click into place. Once you
have installed the Pull Cart Wheels,
they cannot be removed.
7. Attach the Pull Cart Back Support
Pieces to the sides of the Pull Cart
Seat. Insert the Pull Cart Back Support
Pieces and the Pull Cart Front Support
into the base of the Pull Cart until you
hear them click into place. Once you
have assembled the Pull Cart, it cannot
be taken apart.
8. To attach the Pull Cart to the Train
Engine, insert the Hinge into the slot
on the back of the Train Engine. You
will hear the Hinge click into position
to indicate the Pull Cart is attached
correctly.

VTech 4-in-1 Learning Letters Train Specifications

General

Brand	VTech
Model	4-in-1 Learning Letters Train
Category	Toy
Language	English