VTech A700 - Conference Calls

• Incoming calls:*
• All – prevents all incoming calls,
• When roaming – prevents all incoming calls
when you are not registered with your home
network (i.e. when roaming),
• Status check – determines any current settings.
6 e to choose the required option, then c to
confirm and c to activate,
• Confirmation of the new setting will be received
from your network.
Conference calls
Conference calls allow more than two people to talk in a
common connection. You need two separate calls to begin
a conference, these can both be outgoing, incoming, or a
mixture of both.
To start a conference call:
1 Make, or answer your first call in the usual manner,
2 ) to place the call on hold,
3 Make, or answer an additional call in the usual
manner,
4 c to access the menu and choose Join.*
Repeat steps 3 and 4 for each person joining the
conference call, up to a maximum of five people in total.*
To manage a conference call:*
1 During the conference call, c to access the
conference call,
2 c to display conference call participants,
3 e to select one of the callers,
4 c to show conference options available for selected
caller:
• to hang up this call - e to select Disconnect,
• to separate a call away from the conference - e
to select Split,
• to switch between the separated call and the
conference -
)
or e to select Swap,*
• to end the separated call - ( (when connected
to the separated call),
• to end the conference - ( (when connected to
the conference),
• to return to held caller after ending the separated
call - e to select Retrieve. *
*Network dependant (service may not be available)
35
Special features