Customizing your phone
Configure these settings to customize the phone to your
needs.
Change Language
1 From standby, c to enter the menu,
2 e to select Settings, c to enter,
3 e to select the language, and c to enter,
4 e to select the required language, and c to apply.
Display contrast
Allows you to adjust the display to be readable in a variety
of lighting and temperature conditions.
1 From standby, c to enter the menu,
2 e to select Settings, then Contrast,
3 e to select required contrast setting and c to apply.
Battery saving*
Allows you to conserve battery power by disabling the display
and keypad backlight.
1 From standby, c to enter the menu,
2 e to select Settings, c to enter,
3 e to select Battery saving, c to enter,
4 e to select ON (or OFF) and c to apply.
* Version dependent
Alert tones
1 From standby, c to enter the menu,
2 e to select Settings, c to enter,
3 e to select Alert tones c to enter,
4 e to select the following:
You can set the following:
• Deep silent – disables all alert and keypad tones.
You can also switch to this mode from the standby
screen by pressing and holding * – the
icon is
displayed in Deep silent mode,
• Ringer volume – sets the volume of the main alert
for incoming calls,
• Melodies – sets the alerts to use for a variety of
conditions:
• All cases – sets the same alert for all conditions,
• Number stored – sets the alert for incoming calls
from phone numbers stored in your Phonebook,
• Number not stored – sets the alert for incoming
calls from unknown phone numbers,
• Messages – sets the alert for incoming text
messages,
• Alarm – sets the melody for calendar alarms,
• Message waiting – sets the alert used when an
incoming text message is received.
Getting started and everyday use
8
To Next Page
Loading...