10
3. Insert the SUN onto the GALAXY WHEEL. Then, insert the
GALAXY SUPPORT into the BIG WALL and GALAXY WHEEL.
Next, connect the U-SHAPE TRACK to the BLAST-OFF ROCKET
LAUNCHER as shown below.
4. Insert the SNAP-IN MEDIUM RAMP SUPPORT into the slot on the
EXIT TRACK. Next, connect the U-SHAPE TRACK to the EXIT
TRACK as shown below.
5. Insert the SPACE RAMP into the slots on the SPIRAL PLATFORM
and put the SPINNING TOWER PEICE into the SPACE RAMP.
Next, put the STAR CRANK HANDLE on the SPINNING
PLATFORM column as shown below. You will hear a “click” sound
to indicate the pieces are securely connected.
ASSEMBLY INSTRUCTIONS
To Next Page
Loading...
