VTech Blast-Off Space Station - Page 12

11
6. Use the BASE SUPPORT to attach the BLAST-OFF PLATFORM
and SNAP-IN MEDIUM RAMP SUPPORT as shown below. You will
hear a “click” sound to indicate the pieces are securely connected.
7. Connect the EXIT TRACK to the SPACE RAMP as shown below.
You will hear a “click” sound to indicate the pieces are securely
connected.
8. Insert the SNAP-IN SMALL SUPPORT into the slot on the back
of the SPIRAL RAMP TRACK. Then connect the two spiral ramp
tracks as shown below.
ASSEMBLY INSTRUCTIONS