VTech CD1153 User Manual

10
Getting started
Installation options
4. Hold the telephone base with both hands. Press on the tabs as indicated below and
pull the mounting bracket up to release it from the telephone base.
5. Plug the other end of the telephone line cord into a telephone wall jack or a DSL filter.
Replace the handset in the telephone base.
Telephone wall jack
DSL filter (not included)
is required if you have DSL
high-speed Internet service.
The DSL filter must be plugged
into the telephone wall jack.
PULL TAB
TO OPEN
CAUTION: DISCONNECT TELEPHONE LINE
BEFORE CHANGING BATTERIES.
PULL TAB TO OPEN
PULL TAB TO OPEN
CAUTION: DISCONNECT TELEPHONE LINE BEFORE CHANGING BATTERIES.
PULL TAB TO OPEN
PULL TAB TO OPEN
CAUTION: DISCONNECT TELEPHONE LINE BEFORE CHANGING BATTERIES.
PULL TAB TO OPEN
7(/

VTech CD1153 Specifications

General

Brand	VTech
Model	CD1153
Category	Telephone
Language	English