VTech CD1153 User Manual

20
Directory
Create directory entries
ENTER NUMBER
8003604121
_
ENTER NAME
STORED
Blinking
REVIEW STORE
REVIEW STORE
ROBERT BROWN
Store a directory
Follow the steps below to store a new entry in the irectory.
1. When the telephone is idle, press /DIRECTORY to
enter the directory menu.
2, Press or until STORE is blinking.
3, Press SELECT.
4. When the screen displays ENTER NUMBER, use the
dialing keys to enter the telephone number (up to 24
digits).
• Press DELETE to erase a digit.
• Press or to move the cursor to the left or right.
• Press REDIAL to insert a three-second dialing pause (a
P appears).
-OR-
Press and hold REDIAL to copy the last number dialed.
5. Press SELECT.
6. When the screen displays ENTER NAME, use the dialing
keys to enter a name (up to 15 characters). Additional key
presses produce other characters on that key (see the
Character chart on page 19).
• Press DELETE to erase a character.
• Press or to move the cursor to the left or right.
7. Press SELECT to save. Then the screen displays STORED
then returns to directory menu.
• If you enter more than 24 digits in a telephone
number in step 4 above, the screen shows ONLY 24
ALLOWED.
• If you enter more than 15 characters in a name in step
6,the screen shows ONLY 15 ALLOWED.
• If you try to store more than 25 entries in the
directory, the screen displays MEMORY FULL. You
must delete a directory entry before you can store a
new entry.

VTech CD1153 Specifications

General

Brand	VTech
Model	CD1153
Category	Telephone
Language	English