6
Note: To preserve battery life, the VTECH
®
Cody Carpenter’s Light ’n
Learn™ Bench learning toy will automatically power-down after
several seconds without input. The unit can be turned on again by
hammering any button.
ACTIVITIES
A. Talking Mode
1. Slide the ON/OFF/MODE SELECTOR
SWITCH to the TALKING MODE ( )
position. You will hear “I’m busy beaver,
let’s hammer!” followed by a hammering
sound effect. The lights will flash with the
sounds.
2. Hammer the LETTER OR NUMBER
PEGS to hear a random sound effect
followed by the identification of the number
or letter of the peg that was hammered.
The corresponding light will flash with the
sound.
3. Hammer the SHAPE PEGS to hear a
random sound effect followed by the
identification of the colour and shape of
the peg that was hammered. The
corresponding light will flash with the
sound.
To Next Page
Loading...
