7
4. If there is no input to the pegs after 10
seconds, the beaver character will
encourage the child to hammer on the
pegs. If there is no input to the pegs after
another 30 seconds the unit will
automatically power down. The unit can
be turned on again by hammering on any
of the pegs.
B. Music Mode
1. Slide the ON/OFF/MODE SELECTOR
SWITCH to the MUSIC MODE ( )
position. You will hear “I’m busy beaver,
let’s hammer!” followed by a melody. The
lights will flash with the sounds.
2. Hammer the LETTER OR NUMBER
PEGS to hear music notes. The
corresponding light will light up.
3. Hammer the SHAPE PEGS to hear a
random sound effect followed by a pre-
programmed melody. All the lights will flash
with the music.
To Next Page
Loading...
Need help?
General