VTech CS 1550 User Manual

22
23
Call waiting
When you subscribe to call waiting
service with your telephone service
provider, you hear an alert tone if there is
an incoming call while you are on another
call.
• Press to put the current call on
hold and take the new call.
• Press at any time to switch back
and forth between calls.
If you also subscribe to caller ID service, it
will let you see the name and telephone
number of the caller during call waiting.
It may be necessary to change your
telephone service to use this feature.
Contact your telephone service provider
if:
• You have both caller ID and call
waiting, but as separate service (you
may need to combine these service);
• You have only caller ID service, or
only call waiting service; or
• You do not subscribe to caller ID or
call waiting services.
There are fees for caller ID services. In
addition, services may not be available
in all areas.
Redial list
Review a redial list entry
1. Press to enter the redial list.
2. Press ▼/▲repeatedly to browse until
the desired entry displays.
NOTE
• You hear a double beep when you
reach the beginning or end of the
redial list.
Store a redial number into
the phonebook
1. Press to enter the redial list.
2. Press ▼/▲ repeatedly to browse until
the desired entry displays.
3. Press and then press ▼/▲ to
select ADD TO PB.
4. Press to enter name.
5. Press to enter number.
6. Press and then press ▼/▲ to
select MELODY 1 to MELODY 10.
7. Press to confirm.
Redial a call from list
Using a cordless handset
1. Press to enter the redial list.
2. Press ▼/▲ repeatedly to browse until
the desired entry displays.
3. Press to dial.
NOTE
• If there is no number in the list, the
display shows EMPTY.
Delete a redial list entry
1. Press to enter the redial list.
2. Press ▼/▲ repeatedly to browse
until the desired entry displays.
3. Press , and then press ▼/▲ to
select DELETE.
4. Press twice to confirm.
Delete all redial entries
1. Press to enter the redial list.
2. Press ▼/▲ repeatedly to browse
until the desired entry displays.
3. Press , and then press ▼/▲ to
select DELETE ALL.
4. Press twice to confirm.
Find handset
This feature helps you find all system
handsets.
CAUTIONS
• Do not press and hold for more
than four seconds. It may lead to
handset deregistration.
• If the handset displays To register
HS... and ...see manual, refer to
Frequent asked questions to register
the handset back to the telephone
base.
To start paging
Press on the telephone base.
• All idle handsets ring and display
PAGING.
NOTE
• Paging tone continues on the other
handset.
To end paging
• Press again on the telephone
base;
• Press , , on the
handset; or
• Place the handset in the handset
base / charger.
NOTE
• Paging tone stops when paging
stops.

VTech CS 1550 Specifications

General

Brand	VTech
Model	CS 1550
Category	Cordless Telephone
Language	English