VTech CS6114

Other manuals for VTech CS6114

Complete User's Manual50 pages

Online User's Manual43 pages

Abridged User Manual2 pages

Questions and Answers:

C
courtney79Jul 26, 2025
Why my VTech CS6114 Cordless Telephone does not work at all?
- J
  Jason AdamsJul 26, 2025
  If your VTech Cordless Telephone isn't working, ensure the batteries are correctly installed and charged. For optimal performance, return the handset to the base after use. Also, verify the power adapter is securely plugged into an outlet not controlled by a wall switch and that the telephone line cord is firmly connected to both the base and the wall jack. Try unplugging the base, waiting 15 seconds, and plugging it back in, allowing a minute for synchronization. If issues persist, remove and re-insert the batteries or replace them if necessary. As a final step, test the wall jack with another phone to rule out wiring or service problems; if the other phone also fails, contact your telephone service provider.
M
Michael MooreAug 1, 2025
How to fix low battery on VTech Cordless Telephone?
- M
  Mary CunninghamAug 1, 2025
  If your VTech Cordless Telephone displays a low battery warning, place the handset in the telephone base to recharge it. If the problem persists, remove and reinstall the batteries, use the handset until the batteries are fully depleted, then recharge it in the base. If these steps don't resolve the issue, consider replacing the batteries.
M
Melanie GuzmanAug 7, 2025
Why VTech Cordless Telephone batteries do not charge?
- J
  Joshua WellsAug 7, 2025
  If the batteries in your VTech Cordless Telephone handset are not charging, ensure the handset is correctly placed in the telephone base. If that doesn't work, remove and reinstall the batteries, then charge the handset for up to 16 hours. If the issue continues, you may need to purchase new batteries.
A
Alexis DavisAug 18, 2025
What to do if VTech Cordless Telephone is not responding normally?
- P
  Peter TaylorAug 18, 2025
  If your VTech Cordless Telephone isn't responding normally, try placing the handset in the telephone base. If that doesn't work, disconnect the power to the base and disconnect the batteries on the handset. Wait a few minutes, then reconnect the power to the base, re-install the batteries, and place the handset back in the base. Allow up to one minute for the handset to synchronize with the base.

VTech CS6114 Specifications

Frequency

transmit frequency handset	1921.536-1928.448 MHz
transmit frequency telephone base	1921.536-1928.448 MHz

Power

power requirements handset	2.4V 400mAh Ni-MH battery
power requirements telephone base	6V AC @ 300mA
power requirements charger	6V AC @ 300 mA

Memory

handset directory	30 memory locations; up to 30 digits and 15 characters
handset call log	30 memory locations; up to 24 digits and 15 characters

Weight and Dimensions

size handset	6.50 X 2.0 X 1.26 in (165.0 X 51.0 X 32.0 mm)
size telephone base	3.55 X 3.44 X 4.67 in (90.2 X 87.5 X 118.5 mm)
size charger	2.91 X 3.19 X 1.85 in (74.0 X 81.0 X 47.0 mm)
weight handset	4.59oz (130.0g)
weight telephone base	4.32oz (122.6g)
weight charger	1.76oz (50.0g)