VTech CS6114

16
Telephone operation
Chain dialing
Use this feature to initiate a dialing sequence from numbers stored in the
directory, call log or redial while you are on a call.
Chain dialing can be useful if you wish to access other numbers (such as bank
account numbers or access codes) from the directory, call log
or redial list.
To access a number in the directory while on a call:
Press MENU/
SELECT twice to select Directory.
Press MENU/SELECT and then press CID/VOL
-
or /VOL
+
to scroll to the
desired entry.
Press
MENU/SELECT to dial the displayed number.
To access a number in the call log while on a call:
Press MENU/SELECT and then press CID/VOL
-
or /VOL
+
to select
Call log.
Press
MENU/SELECT and then press CID/VOL
-
or /VOL
+
to scroll to the
desired entry.
Press
MENU/SELECT to dial the displayed number.
To access a number in the redial list while on a call:
Press REDIAL/PAUSE and then press CID/VOL
-
or /VOL
+
or REDIAL/
PAUSE to browse to the desired entry.
Press MENU/SELECT to dial the displayed number.
1.
2.
3.
1.
2.
3.
1.
2.
You cannot edit a directory entry while on a call. For more details about the
directory, see page 18.
You cannot copy a call log entry into the directory while on a call. For more
details about call log, see page 26.
You cannot erase a redial entry while on a call. For more details about the redial
memory, see page 17.
Press OFF/
CLEAR to exit redial, directory or call log when you are on a call.
9JGPVJGTGKUOQTGVJCPQPGJCPFUGVQPCECNNQPN[VJGſTUVJCPFUGVVJCV
answered the call can access the directory, call log or redial list.
•
•
•
•
•