VTech CS6114

12
Telephone settings
CID time synchronization
This feature allows the time and date to be set by incoming caller ID
information. The default setting is On.
Press MENU/SELECT when the handset is not in use.
Press
CID/VOL
-
or /VOL
+
until the screen displays Settings, then
press
MENU/SELECT.
Press
CID/VOL
-
or /VOL
+
until the screen displays Set date/time, then
press
MENU/SELECT.
Press
CID/VOL
-
or /VOL
+
until the screen displays CID time sync,
then press
MENU/SELECT.
Press
CID/VOL
-
or /VOL
+
to choose On or Off, then press
MENU/SELECTVQEQPſTO[QWTUGNGEVKQP;QWYKNNJGCTCEQPſTOCVKQPVQPG
Press OFF/
CLEAR to return to idle mode.
Home area code
If you dial local calls using only seven digits (area code not required), you can
program your home area code so that when you receive a call within your local
area, the telephone number is automatically stored without the area code in
the call log.
To change the setting:
Press MENU/
SELECT when the handset is not in use.
Press
CID/VOL
-
or /VOL
+
until the screen displays Settings, then
press
MENU/SELECT.
Press
CID/VOL
-
or /VOL
+
until the screen displays Home area code,
then press
MENU/SELECT. 6JGUVQTGFCTGCEQFGKUFKURNC[GFYKVJVJGſTUV
FKIKVƀCUJKPI
Use the dialing keys (0-9) to enter the desired home area code or press
REMOVE to delete.
Press
MENU/SELECTVQEQPſTO[QWYKNNJGCTCEQPſTOCVKQPVQPG
Press OFF/
CLEAR to return to idle mode.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
6.
If, in the future, your telephone service provider requires you to dial the area
code when making a local call, or, if you move to a location that requires it,
delete the home area code you have already programmed following the steps
above. After you have deleted the home area code, _ _ _ appears.