14
Make a call
Press /FLASH and then use the dialing keys (0-9) to dial the
telephone number.
Predial a call
Enter the telephone number using the dialing keys (0-9), then press
/FLASH to dial.
Answer a call
Press /FLASH or any of the dialing keys (0-9, TONE or #).
End a call
Press OFF/CLEAR or put the handset to the telephone base or charger.
Volume
During a call, press CID/VOL
-
or /VOL
+
to adjust the listening volume.
Share an outside call
You can use up to two system handsets at a time on an outside call.
When a handset is already on a call and you would like to join the call, press
/FLASH on another handset to join the call.
To end the call, press OFF/
CLEAR or place the handset in the telephone base
or charger. The call will not end until all handsets hang up.
Call waiting
When you subscribe to call waiting service from your telephone service
provider, you hear an alert tone if there is an incoming call while you are on
another call.
Press
/FLASH to put the current call on hold and take the new call.
Press
/FLASH at any time to switch back and forth between calls.
•
•
•
•
•
•
•
•
•
The screen shows the elapsed time as you talk (in hours, minutes and
seconds).
When predialing (preview numbers before dialing), press REMOVE or
OFF/CLEAR to backspace and delete; press and hold REDIAL/PAUSE to insert
a dialing pause (a P appears).
If the handset is moved out of range while on a call, it will beep
three times
GXGT[ſXGUGEQPFU.
•
•
•
Telephone operation
This feature is only applicable to model CS6114-2.•