3
Telephone settings
Default settings are indicated by an asterisk(*).
Screen display Function Options
LCD LANGUAGE Set the screen display
language.
ENGLISH*
FRANÇAIS
ESPAÑOL
CLR VOICEMAIL Turn off the voicemail
indicators.
TURN OFF
INDICATOR?
KEY TONE Set whether the handset
beeps whenever a key is
pressed.
ON*
OFF
SET DATE/TIME Set the date and time for
the telephone system.
--:-- --/--
HOME AREA CODE Set the home area code
so that the call log stores
only seven digits for local
telephone numbers.
_ _ _
DIAL MODE Set the handset to be tone
dial or pulse dial.
TONE*
PULSE
Using the menu
To enter the handset menu:
Press MENU/SELECT when the telephone is
not in use.
Press VOL/ or VOL/CID until the
> symbol displays next to the desired
feature menu.
Press MENU/SELECT to enter that menu.
To return to the previous menu, press OFF/CLEAR.
To return to idle mode, press and hold OFF/CLEAR.
1.
2.
3.
•
•
The
>
symbol
indicates the
feature to select.
>RINGERS
SETTINGS
Make a call
Press /FLASH or and then dial the
telephone number.
-OR-
Predial by rst dialing the telephone number
and then press /FLASH or .
Make a call using a speed dial number
Press and hold the speed dial location number (0-9) to display
the desired speed dial number and then press /FLASH or .
Answer a call
Press /FLASH, or any of the dialing keys.
End a call
Press OFF/CLEAR or put the handset in the telephone base
or charger.
Redial
The telephone stores the 20 most recently dialed
numbers. When there are already 20 entries, the
oldest entry is deleted to make room for the
new entry.
To review and dial a number from the redial list:
Press REDIAL/PAUSE when the handset is not in use.
Press VOL/ , VOL/CID or REDIAL/PAUSE repeatedly until
the desired entry displays.
Press /FLASH or to dial.
To delete a redial entry:
When the desired redial entry displays, press MUTE/REMOVE.
•
•
1.
2.
3.
Telephone operation
To Next Page
Loading...
Need help?
General
